|
Vicon V4410S-HD Video Switch Card, switching and decoding circuitry for eight camera inputs. Connector panel V4411RP-BNC or V4411RP-RIB ordered separately.
Capacity of 128 cameras x 8 monitors
High-density reduces hardware and cost
Easy system expandability
Easy serviceability
Matrix 44 is a microprocessor-based video switching system that automatically routes video signals from a requested camera position to a specified monitor. Removable printed circuit boards, featuring plug-in connectors, permit on-site service and minimize down-time of the CCTV system.
The V4481SCC-HD Matrix 44 high-density card cage can accommodate 16 video switcher cards. Each switcher card can accept up to eight video inputs, for a card cage capacity of 128 inputs and eight outputs. This greatly reduces the amount of space required for equipment installation.
The V4481SCC-HD card cage is supplied with a mother board, a video amplifier board, and a power supply. The card cage also contains slots for the following boards: an address decoder card or an internal system CPU (optional), an expander card, and up to 16 video switcher cards. The specific combination of these cards in a given card cage and the number of card cages required for a system are determined by the size and configuration of the video system it is supporting. One high-density Matrix 44 card cage containing 16 video switcher cards can support a system of 128 cameras and eight monitors. The maximum number of cameras and monitors a system can support depends upon the system CPU.
If the V4481SCC-HD is connected to an external VPS1300 CPU (expanded version), the system can support a maximum of 1024 cameras and 256 monitors. With custom software and hardware, there is virtually no upper limit to the number of
cameras and monitors in a system.
|
